2024 RETESA 4100 CU.FT. HORIZONTAL CEMENT PIG/GUPPY

2024 RETESA HORIZONTAL PORTABLE CEMENT PIG/GUPPY:

A. VESSEL

• CAPACITY: 4100 CUBIC FEET, FLANGE HOPPER BOTTOMS TO FIT 6” BUTTERFLY VALVE.
• CONSTRUCTION: STEEL - SMOOTH EXTERIOR WITH EXTERNAL TOP SHELL STIFFENERS AND FULLY WELDED INTERNAL BAR-TYPE RINGS. EXTRUDED STEEL. FRONT AND REAR FRAMES WITH TUBULAR STEEL STRUTS.
• MANHOLES: (1) 20” FULL OPENING KNAPPCO CAST ALUMINUM PRESSURE COVER STEEL COLLARS WITH (6) CAM-TYPE ADJUSTABLE HOLD-DOWNS. LOCATED CENTER HOPPER, HINGED TO REAR.
• INSIDE CLEANING: CUSTOMER RESPONSIBLE FOR INTERNAL CLEANING AND INSPECTION PRIOR TO LOADING.

B. PIPING:

• AIR PIPING: 4” OD, STEEL TUBING ROUTED DOWN STREET SIDE WITH ONE 4” FLANGE MOUNT SWING CHECK VALVE UPSTREAM # 1 HOPPER TEE MOUNTED IN HORIZONTAL POSITION, OR PORTABLE BLOWER UNIT.
• CHECK VALVES: TWO 4” FLANGE MOUNT KNAPPCO SWING CHECKS AT AIR INLET AT REAR AND NON- UPSTREAM OF FRONT HOPPER DISCHARGE OUTLET.
• AERATION: CLOTH AIR PAD, 30” OUTSIDE DIAMETER, 10 DEGREE SLOPE. STEEL HOPPER BOTTOM BOLTED TO FLANGE, 24 GRADE 8, 1⁄2” STUDS ON 3- 5/8” BOLT CENTERS.
• PRESSURE CONTROL VALVE: 4” ALUMINUM BODY BUTTERFLY VALVE, ALUMINUM HANDLE.
• BLOW-DOWN LINE: 4” STEEL LINE WITH (1) 4” ALUMINUM BODY BUTTERFLY VALVE ON ROADSIDE AND BAYCO 15 PSI MECHANICAL RELIEF VALVE LOCATED AT FRONT.
• TOP AIR: NONE.
• HOPPER BOTTOM DROP TEE: (6) 6” TO 5” DISCHARGE AND DROP BOTTOM.
• PRODUCT VALVES: CURBSIDE OPERATION. (6) ULTRAFLOW BUTTERFLY VALVE 5”. NOTE: RETESA WILL NOT AND CAN NOT BE RESPONSABLE FOR PROBLEMS CAUSED BY NON-SEALING HOPPER VALVES.
• DISCHARGE LINE: 5” Ø STEEL TERMINATING BEHIND REAR HOPPER STRAIGHT, 5” STEEL ADAPTOR AND DUST CAP.
• FILL LINE: (4) STEEL LINE 4” Ø LOCATED (2) AT REAR AND (2) AT FRONT, ON CURB SIDE, PROVIDE GROOVE LOCK COUPLING AT TOP.
• PRESSURE GAUGES: TWO LIQUIDS FILLED 0-30# RANGE MOUNTED ON RAIL. CONVENIENTLY LOCATED STREET SIDE UPSTREAM OF HOPPER # 1.
• SAMPLE PORT: NONE.
• IN LINE FILTER: NONE.

C. ACCESSORIES:

• FENDERS AND MUD FLAPS: CONTOURED ALUMINUM AT REAR, STEEL FENDER SUPPORTS AND REAR ANTI-SAIL FLAPS, GALVANIZED U-BOLTS.
• HOSE CARRIER: NONE.
• DISCHARGE HOSE: NONE.
• HOSE STAND AND MANDREL: NONE.
• HOT AIR HOSE: NONE.
• LADDER: (1) STEEL MOUNTED AT REAR WITH SAFETY RAILING. (1) STEEL INTERNAL AT REAR MANWAY.
• WALKWAY: SAFETY TAPE TOP CENTERLINE. WITH 2 SAFETY RAILS
• LIGHTS AND WIRING: 12 VOLT GROTE SYSTEMS WITH 7 WAY ATA CONNECTOR. ALUMINUM BOLT ON LIGHT BOXES EACH WITH TWO RED STOP AND TAIL LIGHTS AND ONE AMBER TURN SIGNAL. COMBINATION MID-TANK CLEARANCE AND TURN SIGNAL. ADDITIONAL HIGH MOUNTED STOP LIGHT AND FMVSS 108 CONSPICUITY TAPE INCLUDED.

D. CHASSIS:

• UPPER COUPLER: 3/8” HI-TENSILE STEEL PLATE WITH 2” FORGED KINGPIN AND HEAVY-DUTY CHANNEL STIFFENERS. ASSEMBLY BOLTED ON AND ADJUSTABLE. PROVIDE SAME SPACE AS PRIOR FOR COSTUMER SUPPLIED AND INSTALLED BLOWER.
• LANDING GEAR: (10) SCREW TYPE JACKS WITH SAND SHOES.
• SUSPENSION: RETESA, (2) SPRINGS WITH 8 LEAF EACH.
• AXLES: (1) ROCK WELL 5” ROUND. 28,000# CAPACITY 77 1⁄2” TRACK, 5/8” WALL THICKNESS.
• BRAKE SYSTEM: AIR ACTUATED 16 1⁄2” x 7” x 3⁄4” S-CAM QUICK CHANGE STYLE. 30/30 TSE CHAMBERS WITH MERITOR AUTOMATIC SLACK ADJUSTERS.
• HUBS AND DRUMS: HUB PILOTED HUBS WITH 10 HOLE OUTBOARD MOUNTED CAST DRUMS.
• OIL SEALS: STEMCO GUARDIAN.
• WHEELS: (4) 10-HOLE HUB PILOTED 22.5 x 8.25 STEEL DISC. PRE-PAINTED WHITE.
• TIRES: (4) 11R22.5 BF-GOODRICH RADIAL TIRES.
• TIRE CARRIER: NONE.
• HUBODOMETER: NONE.
• BUMPER: RETESA STANDARD (D.O.T.).
• PAINT: HALLIBURTON GREY, ONLY CARBON STEEL PARTS.
• LOGO: NONE.
• BLOWER: NONE.